GEZE Accessories for chain drive E 580 for inward opening windows
Scope of delivery with casement bracket, screen, spring cotter and bolts

GEZE Accessories for chain drive E 580 for outward opening windows
Scope of delivery with fixing strip, chain connection, hexagon screws DIN 79991, hexagon nuts DIN 985 – M3, two stoppers and one head screw DIN 84 – M3 x 30.

GEZE Standard bracket
Bracket for direct opening of E 350 N. Scope of delivery with jack rings and casement bracket

GEZE Bracket, inward opening
Bracket for direct opening of E 350 N with inward opening casements. Scope of delivery with jack rings and casement bracket

GEZE Swivel bracket
With the swivel bracket, the tandem version of spindle drive E 350 N can be fitted directly onto the secondary closing edge. As a result, a larger opening width can be accomplished in comparison to a fitting with comparable stroke at the primary closing edge of a skylight. Scope of delivery with jack rings, casement bracket and countersunk screws.

GEZE AS 500 Vent Switch / Button LTA-LSA

• 230 V mains voltage
• For one control section
• For electrically operated spindle, chain and linear drives E 212 R1
• Electrically operated linear drives E 212 R1
• Triple button
• With function buttons “OPEN-CLOSE”
• Optionally with touch or latching function
• For flush mounting

GEZE AS 500 Vent Switch LTA-230

• 230 V mains voltage
• For several control sections
• For electrically operated linear drives E 212 R and E 205  
• Additionally with self-locking module for electrically operated spindle, chain and linear drives E 212 R1
• Triple button
• With function buttons “OPEN-STOP-CLOSE”
• For flush mounting

GEZE Vent Switch AS 500 LTA-SCT

• 230 V mains voltage
• For several control sections
• For electrically operated linear drives E 212 R and E 205  
• Additionally with self-locking module for electrically operated spindle, chain and linear drives E 212 R1
• Triple button
• With function buttons “OPEN-STOP-CLOSE”
• Combined with key switch
• In double frame
• For flush mounting

GEZE Tandem switch E 301 and E 102
The tandem switch is used for simultaneous switching-off of two electrically operated chain drives (230 V AC) that are installed on one window element. The adjustable overtravel time ensures that running time differences between the two drives in the end position can be compensated and equal contact pressure on the casement is provided.

GEZE Tandem power pack E 48
Tandem power pack with 24 V output voltage and integrated direction control for the use of 24 V window drives.

GEZE Setting device E 212 R1 and E 350 N
Only for GEZE electrically operated linear drives E 212 R1 and electrically operated E 350 N.

GEZE Setting device
Suitable for all GEZE electrically operated spindle drives with 230 V AC output voltage.

GEZE E 70 Room thermostat
The room thermostat E 70 is used for regulating the temperature in rooms. The temperature switching point can be individually set between 5 °C and 30 °C.

GEZE Rain/wind control

The rain/wind control unit can be connected without an additional relay to several control systems (signal to be looped through). A rain/wind control unit supplied by the customer can also be used. For this purpose, the customer will need to provide a potential-free make contact.
The rain/wind control unit consists of the following components:
The control unit includes the power pack and the potential-free switching contacts with microprocessor-supported control of the rain/wind signals. Evaluation is either individual or collective.

GEZE Safety scissor
For product liability reasons, the installation of separate safety scissors is mandatory with bottom hung windows. This additional safety device ensures a permanent connection between the casement and the frame, e.g. GEZE safety scissor stay no. 35.

GEZE Gripping and cleaning scissors for GEZE E 212R, E 212 R1 and E 205
In addition to the fanlight opener, bottom hung windows must be provided with additional safeties. They restrict the tilting movement of the casement subsequent to unhinging the opener scissor in a “gripping position” so that the casements do not become a source of danger during cleaning. GEZE FPS is the “intelligent” gripping and cleaning scissor for vertically installed rectangular bottom hung casements.

GEZE radio transmitter

1 channel

GEZE radio transmitter

2 channel

GEZE radio transmitter

4 channel

GEZE WTM transmitting module